On many lakes throughout the U.S. and Canada you will find docks which are installed in the Spring and removed in the Fall. Stationary docks that are supported on the bottom of the lake on poles generally come apart in sections that are fairly light and can be done by hand. Sometimes large plastic wheels are permanently attached to the bottom of the dock poles. Often the fixed dock is light enough and rigid enough that a 30′ long section can be rolled right out of the lake and stored on the beach for the winter.
Floating docks typically use Inflatable Floating Platform and therefore are either made entirely of polyethylene, or have a wood, aluminum, or composite deck that sits on top of the plastic floats. Floating docks weigh significantly more per foot than fixed docks. This additional weight causes it to be more challenging to make a long rigid structure that is certainly light enough to be carried out by hand. Often the longest floating dock sections are limited to about 10 feet. For too long docks, the ten foot sections are linked to flexible connectors. These docks are generally removed if you take the sections apart and hand carrying them out from the water, one 10 foot section at the same time. If you have a smooth beach, you could possibly drag the fully assembled dock the beach with an ATV or SUV. Sometimes individuals will use PVC pipe as rollers under the dock therefore the dock lacks to drag on the sand.
You can find manufactures now making floating docks that could have a single rigid section that is up to 32 feet long. These docks are made of structural aluminum bolted together to form a 24″ tall truss running the length and width from the dock. Polyethylene floats are caged in the truss system and many common dock materials can be used the deck. These truss type structures are light enough and robust enough to permit wheels to become mounted beneath the dock. In the event the dock is meant to be rolled in the beach, polyethylene wheels may be mounted similarly to people used on stationary docks. When the shoreline is just too steep or it is really not useful to store the dock along the shore, a highway rated axle, wheels, and tires may be installed. The axle is galvanized as well as the bearings are generally protected with a military technology that is designed to maintain positive air pressure within the bearing cavity for one year of Drop Stitch Fabric. A square or rectangular aluminum tube can be mounted under one end from the dock. This tube works as a receiver for a 6′ long trailer tongue that can insert about 2′ and then pin into position. There is a trailer coupler on the extended end in the tongue that is designed to get connected to a trailer hitch using a standard 2″ ball.
The dock can be towed across the water to some standard boat launch ramp where tongue is inserted to the receiver turning the dock in to a floating trailer. A light duty truck or SUV backs down the launch ramp until the coupler may be floated on the trailer ball. The coupler is locked on as well as the truck pulls the dock out from the launch ramp the same as it absolutely was a boat over a trailer. The dock can be towed along the highway two miles or 200 miles. Temporary trailer lights may need to be installed depending on the distance and terrain traveled.
This new “Rolling Floating Dock” technology has dramatically reduced the irritation of installing and removing floating docks. Especially benefited are the types waterfront sites which are very steep and possess virtually no beach. Floating Docks are available that are approximately 17′ wide but could be folded up in the launch ramp parking area to simply 8.5′ wide so no special highway permits gbpman needed. Some docks may also include a large second deck. Big docks that are easy to install and take away can replace with the beach that lots of lake front owners wish that they had.
Some manufacturers can even license the dock being a boat allowing it to be motored round the lake with an outboard and tiller handle. These docks be a safe, fun, and mobile platform for swimming and fishing. While technology is racing around us, it really is nice to see that some of that technology is giving us safe places to chill out on Inflatable Drop Stitch with this minds relaxed understanding that the task of closing up for the winter is going to be simple and quick.